ANTRIM SAFETY PRODUCTS
SUPPLY & INSTALLATION
|
|
|
 |
 |
|
|
Assist Range |
|
|
|
|
|
|
|
|
|
|
|
|
Assist Range
The Interclamp Assist range has been specially
designed to help compliance with the Disability
Discrimination Act (DDA) and the Building Regulations
Part M:2004. Unlike many brands, the Assist range is
assembled very quickly and easily by hexagon key, with
no riveting, drilling of tube, welding, threading or
specialist tools required. Furthermore, no other special
fittings are required, which enables full integration
with both new Interclamp systems and the refurbishment
or upgrading of existing tubular structures to help meet
the newer access specifications.
In order to meet the requirements of the above standards,
the range forms flush joints with size C42 tube. Tube
(and fittings where necessary) may be coated in BS or
RAL colours to help meet "not cold to the touch" and
contrasting colour requirements. Steps and disabled
access slopes may easily be accommodated, facilitating
compliance with public access standards.
Please note, in common with type 150, tubes must be 42.4mm
od x 3.2mm wall thickness eg. 1 1/4" medium weight to BS
EN 10255 (formerly 1387). All cut tube ends must be
deburred and treated with Interclamp Silver Galvanising
Spray or other suitable protection. Optional O-rings may
be fitted to each end of the expanding Assist fittings to
achieve the best finish. Patent applied for. |
|
 |
|
 |
| 723 |
| C42 |
|
|
 |
| 725 |
| C42 |
|
|
 |
| 731 |
| C42 |
|
|
 |
| 745 |
| C42 |
|
|
 |
| 747 |
| C42 |
|
|
|
 |
| 750 |
| C42 |
|
|
 |
| 797 |
| C42 |
|
|
|
|
|
|
|
|
|
|
