 |
 |
|
Safety Eyebolts:
Available in a range of sizes in the three standard finishes; galvanised, nylon coated or stainless steel.
- 100mm for use with knurled inserts in brick, concrete and masonry etc.
- 152mm where deeper fixings are necessary
- 75mm for use ONLY in steel structures |
|
|
|
M12 Female Threaded Knurled Inserts are available in lengths of 76mm, 102mm and 150mm to suit varying installation situations. |
|
|
|
16mm diameter resin capsules for use with M12 Female Threaded Knurled Inserts |
|
|
|
Threaded connectors to extend eyebolts for use as Through-Bolts (BS7883:1997 Fig 10) |
|
|
|
All-thread is also available for use with threaded couplers |
|
|
|
PPE Warning discs. |
|
|
|
Polythene sealing washers. |
|
|
|
Spacer sleeves for thick plaster or voids where the distance from the face of the load bearing structure to the collar of the eyebolt does NOT exceed 25mm. |
|
|
|
Cantilever Sockets for voids where the distance from the face of the load bearing structure to the collar exceeds 25mm. |
|
|
|
 marked to PPE Directive |
